Thingiverse
FIlament Holder
di Dudux
14
Download
7
Likes
0
Makes
Filament holder for Prusa Hephestos I3
Allows smooth sliding of the coil, avoiding pulling.
In addition to the printable parts you need the following components:
Two bearings with 22 mm outer diameter and 10 mm internal diameter.
A threaded rod of at least 176 mm in length and 10 mm in diameter.
Description of parts:
* 2 x Soporte.stl - Side supports.
* 2 x Sop_Bobina_Huecos.stl - Supports coil.
* 2 x Tope_Roda_C.stl or Tope_Roda.stl - Side nuts, the threads must be made by forcing the threads into the rod.
* 2 x Tope_Final.stl - Separators between fasteners and supports.
* 1 x Separador_Bobina_Estrecha.stl - Optional part, separate the bearings between them for narrow coils.
* 1 x Separador_Bobina_Ancha.stl - Optional part, separate the bearings between them for wide coils.
In addition to the file for SCAD, the file for FreeCAD is added so that it can be easily modified:
Support_Filamento_Prusa_V3.fcstd
Allows smooth sliding of the coil, avoiding pulling.
In addition to the printable parts you need the following components:
Two bearings with 22 mm outer diameter and 10 mm internal diameter.
A threaded rod of at least 176 mm in length and 10 mm in diameter.
Description of parts:
* 2 x Soporte.stl - Side supports.
* 2 x Sop_Bobina_Huecos.stl - Supports coil.
* 2 x Tope_Roda_C.stl or Tope_Roda.stl - Side nuts, the threads must be made by forcing the threads into the rod.
* 2 x Tope_Final.stl - Separators between fasteners and supports.
* 1 x Separador_Bobina_Estrecha.stl - Optional part, separate the bearings between them for narrow coils.
* 1 x Separador_Bobina_Ancha.stl - Optional part, separate the bearings between them for wide coils.
In addition to the file for SCAD, the file for FreeCAD is added so that it can be easily modified:
Support_Filamento_Prusa_V3.fcstd
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
