Thingiverse
Filament Holder
von birdman1984
0
Downloads
1
Likes
0
Makes
Simple filament holder I made for my Ender 3 with adjustment for spacing. It is a work in progress as I work the bugs out of my design.
You can find the hardware I used at Menards
You need 4 sliding door rollers and hardware to mount.
I used 1/4-20 by 1 inch machine screws.
Edit: 3-16-19
In the first file the ends are in the way of the rollers. So if you don't plan on using the outside holes you will be fine
V2 file has a support in the middle for the sides and and the ends removed
You can find the hardware I used at Menards
You need 4 sliding door rollers and hardware to mount.
I used 1/4-20 by 1 inch machine screws.
Edit: 3-16-19
In the first file the ends are in the way of the rollers. So if you don't plan on using the outside holes you will be fine
V2 file has a support in the middle for the sides and and the ends removed
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
