Thingiverse
Filament Inlet Guide
15
Downloads
7
Likes
0
Makes
UPDATE: To include a plain version to fit the std plastic filament feeder.
The upgrade filament feeder I bought didn't come with an inlet adapter but did have an M6 thread. So I made a filament guide with an M6 thread & printed it in Taulman 3D Nylon 645 as nothing tends to stick, not even to the bed most times!
0.3mm nozzle @ 0.1mm layer height, print time 23 mins. @ 20mm.sec max.
35% infill for Nylon 645
Maybe an addition to this is put a pipe cleaner in the inner cone to remove dust as it feeds??
My printers are i3 Pro B's.
The upgrade filament feeder I bought didn't come with an inlet adapter but did have an M6 thread. So I made a filament guide with an M6 thread & printed it in Taulman 3D Nylon 645 as nothing tends to stick, not even to the bed most times!
0.3mm nozzle @ 0.1mm layer height, print time 23 mins. @ 20mm.sec max.
35% infill for Nylon 645
Maybe an addition to this is put a pipe cleaner in the inner cone to remove dust as it feeds??
My printers are i3 Pro B's.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
