Thingiverse
Filament Keychain Ring
von SSSR_SH
2
Downloads
4
Likes
0
Makes
Filament Keychain Ring
Freely decide the length as needed for quick and convenient printing.
Use 1.75mm printing materials, combined with three parts.
The minimum aperture must be greater than 4.5mm.
Additionally, two sizes of samples are provided: 20x40mm and 40x40mm.
The filament and the end pieces need to be glued together.
No support is required for printing.
Freely decide the length as needed for quick and convenient printing.
Use 1.75mm printing materials, combined with three parts.
The minimum aperture must be greater than 4.5mm.
Additionally, two sizes of samples are provided: 20x40mm and 40x40mm.
The filament and the end pieces need to be glued together.
No support is required for printing.
SSSR_SH veröffentlicht auch auf
225 zusätzliche Modelle auf 3 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
