Filament rack brackets for amazon work table

These brackets were designed to mount 2 filament racks on the cross bars between the legs on the table I have my printer on. I made two sets of them for 2 racks that will hold about 17 rolls of filament each so the 3mf file has parts for 2 racks. 1 rack requires 4 U-shaped brackets, 4 of the dovetail bottom clips for those, 4 of the long bow tie parts to clip the two brackets on each side together, and 2 pieces of ½" EMT metal conduit. The dovetail joints for the bottom brackets are intentionally tight and may require some taps with a hammer to get them seated. I printed all these parts in ASA, but PLA or PETG would probably work fine as well. I have this specific table from amazon and these were designed for that table. It may work on other similar tables, but I can't say for sure.https://www.amazon.com/HABUTWAY-Adjustable-Workbench-Capacity-Heavy-Duty/dp/B0BVT88DMS/ref=sr_1_5?crid=258DIMA7X9XFY&dib=eyJ2IjoiMSJ9.uHBEqTULzDsQGZl9KviJToOVZ7eyCBZnN0ovM14Q2BvJgnDNrMCvSB6Wn5jQJ9z6s