Filament Rack

Filament rack that I modeled to use inside IKEA Lack -enclosure. Each end consist of 4 pieces. I used superglue to hold the upper part to the lower part, supports and zip ties holds the vertical pieces together.

I used 20 cm diameter filament spools when modeling this and you have to slightly tilt the spools to get them in place.

To build this you need:
Printed parts
- end pieces x 2
- support x 4

From hardware store
- 12 mm wood (or other material if you want) rods x 8 (i used 50 cm in length)
- zip ties

Overall printing and assembly took 1,5 days