Filament Roller

Filament RollerHey, Here I present my Filament roller which i modelled in Fusion 360. Its quick to print, stable and doesn't require much parts. You can use the filament roller without fixing them or you can fix them to wood using the fixing holes at the bottom of the base. BOM4 x 608 ball bearing, can be found on amazon, makerworld, skate shops. 4 x M3 x 18mm screw. I used button head screws.4 x M3 nut2 x Roller Base (Printed)8 x Spacers (Printed). Use 2 spaces per bearing.4 x Wheel Pulleys.When installed the bearings into the pulley wheels, you may need to give it a good push with your thumbs as I have put a 0.05mm tolerance for a nice tight fit. This was printed in Bambu Filament which was dried, so ensure your filament is dried before printing.