Thingiverse
Filament sample card carousel
by primermecos
19
Downloads
11
Likes
0
Makes
I designed a spinning carousel for my filament samples. There are 36 slots for your sample cards, business cards, credit cards or whatever fits in it.
In the file "cardholder_v4.stl" the slots are 1.1 mm thick.
In the file "cardholder_1.2mm_v1.stl" the slots are 1.2 mm.
If you want to use my filament sample cards
https://www.thingiverse.com/thing:4050941 or
https://www.thingiverse.com/thing:4046311
I would recommend to print the 1.2 mm version because with the 1.1 mm version it's a tight fit. (probably because I've printed it in PETG)
If you want to use it only for business card, the 1.1 mm should be thick enough.
In both files there is a hole on the bottom for a 608 bearing.
On the platform-file the pin for the bearing is 7.9 mm.
I included the Fusion360-files if you want to modify this thing.
In the file "cardholder_v4.stl" the slots are 1.1 mm thick.
In the file "cardholder_1.2mm_v1.stl" the slots are 1.2 mm.
If you want to use my filament sample cards
https://www.thingiverse.com/thing:4050941 or
https://www.thingiverse.com/thing:4046311
I would recommend to print the 1.2 mm version because with the 1.1 mm version it's a tight fit. (probably because I've printed it in PETG)
If you want to use it only for business card, the 1.1 mm should be thick enough.
In both files there is a hole on the bottom for a 608 bearing.
On the platform-file the pin for the bearing is 7.9 mm.
I included the Fusion360-files if you want to modify this thing.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!