Filament Sample Card

层高0.1，首层0.1， 100%填充打印 标签区域尺寸为30mm*40mm,2mm圆角 原始文件中有F3D文件，可以使用Fusion360进行二次创造 色卡本身需要需要使用0.1的层高，起码要保证首层是0.1层高，100%填充，收纳盒对打印配置要求不高，默认即可，盖子推荐使用透明PETG材料打印 为了适配gridfinity，添加了一个长度更短的版本，这个版本的收纳盒附带了gridfinity的模块，底部可以预留了4x2mm的磁铁的槽位，如果不需要这个模块，也可以将它移除 0.1mm layer,0.1mm first layer,100% infill The label area size is 30mm*40mm with 2mm rounded corners Click the Raw Model Files button to download the F3D file, Edit with Fusion360 The color card itself needs to use 0.1 height, at least to ensure that the first layer is 0.1 height, 100% filled, the storage box has no high printing configuration requirements, the default can be used, the lid is recommended to use transparent PETG material printing To accommodate gridfinity, a shorter version has been added that includes a gridfinity module with a slot for a 4x2mm magnet in the bottom, which can be removed if the module is not needed