Filament Scale

Simple scale to report weight of filament spool.Link to code: https://create.arduino.cc/editor/alieneila/3f787723-b75e-495c-aea3-6f5319555509/previewItems used:5kg Load CellHX711 Amplifier Module128 x 32 OLED Display2 x 6700ZZ Bearings (10mm ID, 15mm OD, 4mm W)5 x M32 x M52 x M410 x Female to Female Jumper wiresESP32-WROOM Dev BoardThere are 4 wires for the HX711 to Control Board, 4 wires for the OLED to Control Board, and 2 wires to cut the female ends off (leave about 2 inches of wire on each) to use to add connectors to the 4 Load Cell Wires. You can also shorted the load cell wires as you see fit. Additionally, the pins for the OLED can be bent about 45 degrees if you find that they're in the way from the HX711 clamp. Load Cell to HX711 Wiring:Red to E+Black to E-White to A-Green to A+ HX711 to ESP32 Dev Board wiring:VCC to VINGND to GNDSCK to 18D to 19 OLED to ESP32 Dev Board Wiring:VCC to 3.3vGND to GNDSCL to 22SDA to 21