Filament Shelf Labels (Customizable)

Filament shelf labels made to fit shoe racks or can be flat mounted step and fusion files also included see below for preparation instructions How to colorize with Bambu studio, Orca Slicer, or Anycubic Slicer Next Video Link https://www.youtube.com/watch?v=j9duruJpSKs STEP 1 Import File and use "Auto orient", "Rotate", or "Lay on face" tool to rotate the Label so the flat face is on the build plate Step 2 Open assembly view Step 3 Set the base color using the selection bar at the top Step 4 Color the letters using the fill tool located within the Color Painting Dialog Step 5 Exit assembly view, then slice and print! Please Note: you can use the standard color painting option rather than the assembly view to color the model. However doing it this way only adds the color to the top surface of the letters instead of the full depth of the letter. This can cause the base color to bleed through into the letters resulting in a less desirable effect How to remove clip for flat mounting  with Bambu studio, Orca Slicer, or Anycubic Slicer Next Video Link https://youtu.be/l0llZclHTSE Step 1 Import File and use "Auto orient", "Rotate", or "Lay on face" tool to rotate the Label so the flat face is on the build plate Step 2 switch the "Process" bar from the "Global" to the "Objects" tab with the model selected click the "Split to Parts" button from the top bar you should now see all the individual components in the objects list NOTE: do not use the "Split to Objects" option as you can easily loose the position of the different components Step 3 -Click on the objects in the list one at a time until only the clip is highlighted on the model -right click on the object and delete it you can now colorize the model as shown above and print! How to make custom labels with Bambu studio, Orca Slicer, or Anycubic Slicer Next Video Link click here Step 1 Import one of the blank labels, there are 5 base sizes to chose from based on length. 50mm, 100mm, 150mm, 200mm, and 250 you can further