MakerWorld
3D Printer Accessories
Zum Modell
Filament Shelf
276
Downloads
109
Likes
197
Makes
This filament shelf is designed to use two hollow aluminum pipes (outer diameter 20 mm, 1 mm wall thickness). The pipes slot into the holders.The files include two holders (left and right) as well as an optional center piece for supporting longer pipes. I used 1 meter pipes and don't need the center support. Fully loaded with 14-15 spools, the pipes hold up well for me.Variants: short: Use only left and right mount (up to 1 m pipe)long: Use left, right and center mount (>1 m pipe)creative: Use multiple “center” mounts for solid pipes, longer versions, etc. PrintingPrint on its side, I would recommend at least three perimeters and 20 % infill. (Thats how I printed mine in PETG, they hold up well)I recommend adding tree supports for the screw holes.MountingI highly recommend using screws (diameter 4-6 mm) in combination with washers. This way, the mounting pressure is distributed on a larger area and I don't think that they will ever come off the wall. The srew holes are 6.5 mm in diamet
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!