Thingiverse
Filament Spool Adapter Single Roll
9
Download
6
Likes
0
Makes
This is my simple Filament Spool Adapter for virtually every size spool. Simply print two of them, slide one on a 8mm shaft with an end-stop. Slide on a spool of your choice. Slide on other adapter and other end-stop. Enjoy.
The following setting is what works best for me. Feel free to tweak to your needs.
Layer height: 0.2mm
Shell thickness: 0.8mm
Bottom/Top thickness: 0.6mm
Fill Density: 25%
Print Speed: 40mm/s
Print Temp: 230C
Bed Temp: 80C
Support Type: Everywhere
Platform Adhesion: Raft
Filament Dia: 1.75mm
Fliament Flow: 100%
Retraction Speed: 40mm/s
Retraction Distance: 0.5mm
The following setting is what works best for me. Feel free to tweak to your needs.
Layer height: 0.2mm
Shell thickness: 0.8mm
Bottom/Top thickness: 0.6mm
Fill Density: 25%
Print Speed: 40mm/s
Print Temp: 230C
Bed Temp: 80C
Support Type: Everywhere
Platform Adhesion: Raft
Filament Dia: 1.75mm
Fliament Flow: 100%
Retraction Speed: 40mm/s
Retraction Distance: 0.5mm
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
