Filament spool holder

Filament spool holder for Bambulab P1S, X1C printers. This is a remix of https://makerworld.com/en/models/23491?from=search#profileId-58229Here is what is improved:The roller was extended to accept bigger spools, up to 100mm wide.The arm was also extended, towards the front, to prevent rubbing of the bowden tube and the spool.A slope was added to the roller to always center the spool in the middle and avoid chances stucking.The angle of the bracket was reduced to 88° to eliminate the gap with the left wall of the printer.Bevels are added to the sharp edges for smoother feel.For the spool holder you will need:2x M3x12 screws2x 608 ZZ / 2RS ball bearings (8mm x 22mm x 7mm). If you don't have bearings available, you can print a pair, or you may not use them at all.Step file of the project is also included!Enjoy! Boost MeI spent a lot of time designing and preparing this model. If you find it useful, please like and rate it. Sharing pictures of your print and boosting would be greatly