Filament Spool Rack

Filament Spool Rack using 1/2" PVC Pipe A simple, sturdy, and low‑cost filament spool rack built around common 1/2" PVC pipe. The design uses two printed end brackets that hold the pipe. Optional middle bracket can be used if you want to print a longer rack. This will keep the PVC pipe from bending. THe middle bracket has slightly wide holes, so the it slides move easly onto the pipe. Core ComponentsEnd Brackets - Two are neededOptional Middle Bracket - Depending on the size, you might not need any or you may need more that one. Standard 1/2" Schedule 40 PVC works perfectlyCut two pieces of PVC pipe of equal lengths. Cut to whatever length works for your situation. PVC is inexpensive and widely available. Fast print: Brackets print in about 1 1/2 hours on most printers. In my case, I wanted to use with a wire frame baker's rack that is 36" wide by 14" deep. I cut 4 pieces of PVC pipe 33" long. I printed four end brackets and two middle brackets. This allowed