Thingiverse
Filament Spool Stand
di kenaroh
3
Download
11
Likes
0
Makes
Stackable supports to create a rack for storing your filament spools in a minimum of space.
Bracket B serves as a stand, and you can stack brackets A up to 4 high.
Each level requires 2 cylindrical bars in aluminium, for example (lighter than steel), with a diameter of 10 mm and a length of 500 mm. These bars are generally sold in 1 m lengths, and simply need to be cut in the middle. You'll also need 2 x 500 mm bars for the base (see photos).
PLA printing, triple walls and 20% cubic filling
Supports required for centering pins
Prints made on an Elegoo Neptune 3 Pro, which allows 225 x 225 mm, support B has been rotated 45° to fit on the tray.
There's no need to glue the parts, which fit together.
Bracket B serves as a stand, and you can stack brackets A up to 4 high.
Each level requires 2 cylindrical bars in aluminium, for example (lighter than steel), with a diameter of 10 mm and a length of 500 mm. These bars are generally sold in 1 m lengths, and simply need to be cut in the middle. You'll also need 2 x 500 mm bars for the base (see photos).
PLA printing, triple walls and 20% cubic filling
Supports required for centering pins
Prints made on an Elegoo Neptune 3 Pro, which allows 225 x 225 mm, support B has been rotated 45° to fit on the tray.
There's no need to glue the parts, which fit together.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!