Slicer Discord
Filament Spooler Design – 3D-Druckmodell von MakerOnline MakerOnline
Filament Spooler Design – Bild 1 Filament Spooler Design – Bild 2 Filament Spooler Design – Bild 3 Filament Spooler Design – Bild 4 Filament Spooler Design – Bild 5
Hobby&DIY

Filament Spooler Design

von LaZy · Hobby&DIY
686 Downloads
146 Likes
0 Makes
Zum Modell
The lower parts of the base can now also be printed with a 0.8 nozzle because the details are now on the upper individual part The upper individual parts are now easier to print because they are printed lying flat After printing, they are inserted into the slots in the bases The bearing side with the tab therefore has two holes: 2.5 mm and 2 mm for M3 and M2.4 screws These are simply screwed in The section with the pins for the pinion on the main axle is now easier to print in detail The same applies for the upper part with the thread as for the lower parts of the base (0.8 nozzle) The two individual parts are glued together with a positive fit After use, the filament spooler can be easily separated into two parts and stowed away to save space
Kategorie
Hobby&DIY
Quelle
MakerOnline
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen