Filament Storage

filament storage box, with integrated dry box and humidity/temp sensor

I dont like printing to much with support structure, I devided parts and glued them on with 2k glue. You can remix and edit the stl files with a CAD program and join parts.

I´m currently still working on the shaft diameter, I first wanted to use bearings, but it works fine without. So I´ll need to update that part.

Short instructions:

1. Glue T1&T2 together
2. Glue T2&T3 togehter
3. Glue one T4 on each side of the holders (4 in total)
4. Glue T10 (foot) to the bottom side of one of the wto halves
5. use 1.75mm TPU filament as seal and stick it on the contact surface between the holders
6. Use Bolt&Nut to fix T8&T9 to T4

the rest should be self explaining


You´ll need to print the following parts:

Housing Part 1:
1x T1_Housing_without_Window

Housing Part 2:
2x T2_Housing_Without_Filament_Exit

Housing Part 3:
1x T3_Housing_Part3

Holder hinge:
4x T4_Holder_Hinge

Filament shaft