Thingiverse
Filament Straightener
von gmelenka
216
Downloads
135
Likes
1
Makes
This is a customizable filament straightener for when you have tightly wound filament spools. This should help to straighten out highly bent 3D printer filament spools.
This part can be customized to suit different bearings and fasteners that you may have available. Make sure to accurately measure the bearings and fasteners that you intend to use.
Bill of Materials
3x 5/16-18 1.5" Screws (~7.9mm)
3x 5/16-18 Nuts
3x 608 bearings (OD22mmxID8mmxT7mm)
3x5/16" washers (currently not show but I suggest that washers are added)
This part can be customized to suit different bearings and fasteners that you may have available. Make sure to accurately measure the bearings and fasteners that you intend to use.
Bill of Materials
3x 5/16-18 1.5" Screws (~7.9mm)
3x 5/16-18 Nuts
3x 608 bearings (OD22mmxID8mmxT7mm)
3x5/16" washers (currently not show but I suggest that washers are added)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!