Thingiverse

Filament Swatch

by JimTiffinJr

2.4k Downloads

1.5k Likes

13 Makes

Go to Model

A 100mm x 45mm x 3mm swatch to provide my students with information to help them with their 3D printing projects. Besides just showing the colors of filament that we have available to print with in our makerspace - which is often the highest priority question that they have... :-)

...these "Precedent Studies" also provide other important information to help them anticipate the likelihood of success with their prints.

There is a transparency test given in the following thickness steps:
- 0.2mm
- 0.4mm
- 0.6mm
- 0.8mm
- 1.0mm
- 1.5mm
- 2.0mm

There is a section where walls of various thicknesses can be inspected:
- 0.5mm
- 1.0mm
- 1.5mm
- 2.0mm
- 2.5mm
- 3.0mm

A simple set of bridging tests are included, along with a protective floor to prevent them from being accidentally broken off by curious students:
- 5.0mm
- 10.0mm
- 15.0mm
- 20.0mm

A series of overhang tests to let students see the effects of creating models with these angles:
- 15

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format