Filament Type Reminder

Filament Type Reminder使用一小段双面胶固定在3D打印机上、AMS上、干燥箱上，或者单纯的当做一个解压玩具。强烈建议使用0.2喷嘴打印，已经做好涂色和摆盘，直接打印即可如需使用0.4喷嘴打印，建议放大40% Use a small piece of double-sided tape to attach it to your 3D printer, AMS, drying box……It is strongly recommended to print with a 0.2mm nozzle, already prepared for coloring and layout, ready for direct printing.If printing with a 0.4mm nozzle, it is recommended to enlarge by 40%.