Filament Wall Bracket - 2 Piece

Wanted a wall mount bracket to use for spools of filament. There are a lot out there, but I wanted something that didn't crack when you ran a screw into it, hence printing orientation in 2 pieces. I've had them break right off the wall. There are dowels to position. Use the base as a template to mark holes, then a couple drops of glue in each hole on the base and insert the hanger into the base. Screw to the wall. Another thing that bugged me about a number of models I used is that the screw holes are horizontal to the bracket and trying to run them in with a driver is difficult. That and the recessed holes are not tapered for a drywall or deck style screw so they crack or just don't fit well. These screw holes as shown, are both recessed and also at an angle to the bracket so are a breeze to install with a driver. This is made for a 1" dowel, piece of PVC or conduit. This is compatible (tube distance/height) to my other models for filament hanging/mounting.