Slicer Discord
Filtration system for 3D printers – Modelo 3D imprimible de MakerWorld MakerWorld
3D Printer Accessories

Filtration system for 3D printers

47 Descargas
35 Likes
21 Makes
Ver Modelo
I created a filtration system for the Enclosure for A1mini (https://www.printables.com/model/595731-bambu-lab-a1-mini-enclosure). I was inspired by a bento box, which has the same style of stacking filtration layers. This system uses carbon cartridges designed for SLA printers and a HEPA filter for a robotic vacuum cleaner. It can be used in several ways: 1) reducing the temperature inside the enclosure and filtering air when printing PLA/PETG,2) filtering the air after printing ABS/ASA. I believe this system can also be used with other enclosures where 80x80 fans can be installed. You will need 4x M3 threaded inserts, which you will melt into the holes as shown in the photo below. The remaining holes in the parts need to be fitted with D5x6 magnets, which must be glued in parallel with the surface. Assembly Instructions: look at gif in pictures above.Boost MeIf you like my filtration system, please boost me! Thank you <3Carbon cartridges:https://www.aliexpress.com/item/100500584880319
Categoría
3D Printer Accessories
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Intermedio Baja confianza
Pieza única Tornillería requerida
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 1/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA, ABS, PETG
Postprocesado
Tornillería
Software
Cura, PrusaSlicer o similar
Mismo diseñador, más plataformas

Alesh también publica en

18 modelos adicionales en 1 plataformas más

Verificado por coincidencia de títulos de modelos entre plataformas.
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

2 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección