Thingiverse
Finger Fidget
di Celebi
0
Download
1
Likes
0
Makes
Short description
Finger Fidget: a 3D-printable fidget toy consisting of an inner and an outer ring. Import both STL files into Cura, centre them together on the print bed and print them at the same time. If the inner ring is too tight, scale it slightly on the X and Y axes and use exactly the same X and Y values for a smoother fit.
Title
Finger Fidget – Modular Inner and Outer Ring
Print without support.
Recommended layer height: ±0.2 mm
20–30 % infill
PLA, PETG or ABS all work well
Light sanding can make the movement even smoother.
The shape is inspired by bearings and ring structures but without complex parts.
Finger Fidget: a 3D-printable fidget toy consisting of an inner and an outer ring. Import both STL files into Cura, centre them together on the print bed and print them at the same time. If the inner ring is too tight, scale it slightly on the X and Y axes and use exactly the same X and Y values for a smoother fit.
Title
Finger Fidget – Modular Inner and Outer Ring
Print without support.
Recommended layer height: ±0.2 mm
20–30 % infill
PLA, PETG or ABS all work well
Light sanding can make the movement even smoother.
The shape is inspired by bearings and ring structures but without complex parts.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
