MakerWorld

Decor

Fir tree

by user_4213024469 · Decor

2 Downloads

2 Likes

1 Makes

Go to Model

Will look good in your house! Only takes about 3 hours! But would not recommend without supports.Boost Me

Category

Decor

Source

MakerWorld

Published

25.12.2025

Updated

02.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

3 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Fir tree need supports when printing?

No supports needed for Fir tree — it's designed to print clean off the bed.

How long does it take to print Fir tree?

According to the design notes, Fir tree takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Fir tree available in?

Fir tree is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Fir tree free to download?

Yes, Fir tree is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Fir tree

Similar Models

Add to Collection