Fire Dragon - Hueforge

This is a small Hueforge Picture of a Fire Dragon for good luck in 2024. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 4Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #24 (2mm) swap