Fire Hydrant

This is a fire hydrant that will used by the dog. (you can guess the purpose !)I saw a few, on site like Ebay or Temu, but they were only 14' high (35 cm), and that wasn't sufficient. Ended up designing my own !The total height is 24" (61 cm), and is made of 3 main parts (Base, mid and top section) My design is taking the whole print area of my BambuLab. I even wanted to use a different filament for support, but there wasn't enough room for the prime tower !!!I made my design, with as little support as possible.The base and the mid section are assembled together with a threaded rod in the center. I used 1/4 -20 rod, as this was the easiest to find where I live. I did tap the thread directly into the base (no thermal insert) as not much force was required. You will need 1-½ Kg of red filament, and ½ of silver filament. Total print time of around 60 hrs.You will also need:8 x M3 Thermal insert to fix the plug square onto the plugs(design was for 4 par square, but I only u