Firebat F1 case

## Firebat F1 – Custom Mini PC Case

**Material:** PETG-CF10
**Nozzle:** 0.6 mm

### Construction

- The **bottom part of the enclosure** is the original case from the Firebat F1.
- **Heat-set threaded inserts** from the stock enclosure were reused.
- **Fine dust mesh** was installed behind the ventilation openings.

### Cooling

- **Fan:** 80 × 10 mm
- **Voltage:** 12 V
- **Power source:** USB port

Rubber rings were placed under the fan to slightly increase the clearance and improve airflow.

### Notes

This is my first attempt at designing something more complex than a simple pencil holder.
The design will likely be refined further — there are still several aspects that can be improved.