MakerWorld
Hueforge & Lithophane
Zum Modell
Firefighter Hueforge
57
Downloads
43
Likes
24
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150.15mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA Bambu Black Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Red Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Orange At layer #14 (1.2mm) swap to Yellow At layer #18 (1.52mm) swap to Red for the rest. Boost MeIf you like my models consider a boost. It would be highly appreciated!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
![[Multi-color/Assembly] Mecha-Style Fire Axe 2.0: Gundam Color Scheme, Glue-Free/Loose Fit Dual Versions](https://wsrv.nl/?url=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FDSM00000002202934%2Fdesign%2F2026-01-05_2b5d3d88f5d0c.jpg&w=400&h=300)
