Thingiverse
FireStick 4K Sleeve Revised
par 8bitz
15
Téléchargements
6
Likes
0
Makes
printed in Sunlu PETG.
Held on to remote by tension.
Recommend printing at 98 percent scale.
Tree supports everywhere recommended.
Below settings were used in Cura:
- Print Speed 65 mm/s
- Cooling - Fans Off
- Tree Supports = On (Everywhere)
- Build Plate Adhesion = Brim
- Scale = 98% (original print @ 95% had issues with layer adhesion)
Held on to remote by tension.
Recommend printing at 98 percent scale.
Tree supports everywhere recommended.
Below settings were used in Cura:
- Print Speed 65 mm/s
- Cooling - Fans Off
- Tree Supports = On (Everywhere)
- Build Plate Adhesion = Brim
- Scale = 98% (original print @ 95% had issues with layer adhesion)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
