Firewatch - Hueforge

This is HueForge of my favorite desktop wallpaper. It uses 7 colors, because this was kind of test for me of using more than 4 colors in hueforge. Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x149.71mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.4mm and the Actual Depth is 2.5mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA Spectrum Navy Blue Transmission Distance: 2PLA Spectrum Signal Violet Transmission Distance: 2.5PLA BambuLab Basic Pink Transmission Distance: 8PLA JamgHe Blue Transmission Distance: 3PLA BambuLab Matte Ice Blue Transmission Distance: 3.5PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filaments Swap Instructions:Start with BlackAt