Thingiverse
fischertechnik MPU6050 movement sensor
par juh
4
Téléchargements
2
Likes
0
Makes
This is a case for the MPU6050 GY521 gyroscope/accelerometer module with fischertechnik connectors.
The 2x6 I2C pin connector is pin compatible with ftDuino and fischertechnik TX connectors. See the pictures for assembly details. A lightguide for the module's LED is optional, just drill or push the hole in the top part fully through and insert a short length of transparent 1.75mm filament.
If you like my design, please leave a comment, upload a make, or favorite it.
__Materials and methods__
6x2 pin header
2x7 strip of perfboard
a couple of wires
8mm piece of transparent filament (optional)
Previously published at [Youmagine](https://www.youmagine.com/designs/fischertechnik-mpu6050-movement-sensor)
The 2x6 I2C pin connector is pin compatible with ftDuino and fischertechnik TX connectors. See the pictures for assembly details. A lightguide for the module's LED is optional, just drill or push the hole in the top part fully through and insert a short length of transparent 1.75mm filament.
If you like my design, please leave a comment, upload a make, or favorite it.
__Materials and methods__
6x2 pin header
2x7 strip of perfboard
a couple of wires
8mm piece of transparent filament (optional)
Previously published at [Youmagine](https://www.youmagine.com/designs/fischertechnik-mpu6050-movement-sensor)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
