Fishbone bookmark

If you want a hole in the bookmark, add a negative part (cylinder) and adjust his size and position in the model. In the print project, the negative part is inserted. Model size is 65x200mm. You can scale it, but when changing dimensions, you must not change the height (Z). Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA Elegoo+ Black Transmission Distance: 0.3 PLA Bambulab Basic Brown Transmission Distance: 2 PLA Elegoo + White Transmission Distance: 6 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Brown At layer #11 (0.96mm) swap to White for the rest.