Thingiverse
FIVE33 Switchback Pod / Antenna Mount / Caddx Vista Stack Adapter
por WrathPak
25
Descargas
16
Likes
0
Makes
This is a pod for the Five33 Switchback frame, as well as an sma antenna holder that also secures the capacitor out the back. Included as well are some ~2gram TPU motor wire arm protectors and an adapter plate to go from 30x30 to 20x20 for the Caddx Vista Digital DJI VTx.
The pod will fit a mini or micro sized camera without any modification or adapters needed.
I am not sure how well a two board stack will fit under the vista inside this pod but it's possible. I use the iFlight Succex-A AIO board. it's a FC and 4in1 ESC on a single board.
The 30mm to 20mm stack adapter is offset towards the back to give more room for wiring and the fpv camera. It also has little bumpers around the holes that face down, to protect the board underneath from the screw heads. I only use 3 of the four holes due to usb placement on my AIO FC. Please make sure to turn the vista around, so that the ufl antenna port is closer to the front of the frame. this gives it the room you'd need to plug in the ant
The pod will fit a mini or micro sized camera without any modification or adapters needed.
I am not sure how well a two board stack will fit under the vista inside this pod but it's possible. I use the iFlight Succex-A AIO board. it's a FC and 4in1 ESC on a single board.
The 30mm to 20mm stack adapter is offset towards the back to give more room for wiring and the fpv camera. It also has little bumpers around the holes that face down, to protect the board underneath from the screw heads. I only use 3 of the four holes due to usb placement on my AIO FC. Please make sure to turn the vista around, so that the ufl antenna port is closer to the front of the frame. this gives it the room you'd need to plug in the ant
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
