(FIXED) Identity Disk - V2

As with the previous design, is intended to use two soldered 9 volt-powered 335 LED strips (one 20 inches long and one 24 inches long from http://glowhut.com/) that go to the same 9-volt battery.

Two versions are included in the files, a full version for larger printers and a half version for smaller ones. You will need to print 12 Spokes models in total, and each side of the disk are different designs (one side with magnet holes and another with none), meaning the disks on either side are NOT interchangeable with each other.

‎
𝗜𝗻 𝗼𝗿𝗱𝗲𝗿 𝘁𝗼 𝗺𝗮𝗸𝗲 𝗮 𝗳𝘂𝗹𝗹 𝗱𝗶𝘀𝗸, 𝘁𝗵𝗲 𝗳𝗼𝗹𝗹𝗼𝘄𝗶𝗻𝗴 𝗽𝗮𝗿𝘁𝘀 𝗮𝗻𝗱 𝗻𝘂𝗺𝗯𝗲𝗿 𝗼𝗳 𝘁𝗵𝗲𝗺 𝗮𝗿𝗲 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝗱:

1 x 'Disk_Face_1_No_Magnets'

1 x 'Disk_Face_2_Magnets'

1 x 'Internal_Ring'

1 x 'Light_Mount'

2 x 'Light_Insert'

(optional A) 1 x 'Blade_-_Off'

(optional B) 1 x 'Blade_-_ON'

12 x 'Spoke'

‎

This is a redesigned and more complex version of https://www.thingiverse.com/thing:7147903. It is a big work in progress and any makes with documentation would b