Flaming Skull HueForge with frame

I've included a mini frame for this. It prints in less than an hour and the print can be superglued to the frame or I have been using glue dots that are mostly used in scrapbooking. The frame prints great with the satndard .2 print profile. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm Filaments Used: #0f1f0b PLA Bambu Labs Black Transmission Distance: 0.1 #3c4d62 PLA Bambu Labs Blue Grey Transmission Distance: 2.8 #b60e14 PLA Bambu Labs Red Transmission Distance: 3.4 #ffd16f PLA BambuLabs Matte Lemon Yellow Transmission Distance: 3.6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.64mm) swap to Blue Grey At layer #9 (0.88mm) swap to Red At layer #14 (1.28mm) swap to Lemon Yellow for the rest.