Flamingo On Clouds (HueForge)

Hey folks, this is my first model. Your feedback is much appreciated!SummaryFor those who are familiar with HueForge you will mostly be interested into these information:This print uses 3 unique filaments: black, white and a color of your choicePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mm.Swap Instructions:Start with BlackAt height 0.56mm swap to WhiteAt height 1.04mm swap to BlackAt height 1.12mm swap to Pink/Orange/Red e.g.At height 1.92mm swap to White for the rest.I added an extra height of 0.24mm to make it less floppy. Feel free to remove this height from the back to save some filament.Additional informationTo print this HueForge, no AMS is needed. Just slice it, navigate in the “Preview”-Tab to the desired layer and right-click on the slider. Now you can choose to either change the filament to a certain one or add a pause. When the 3D-printer has paused you can manually load the