Thingiverse
Flamingo Paradise
por 86reddawg
84
Descargas
59
Likes
0
Makes
Inspired by TikiLuke's Pocket Luai
https://www.thingiverse.com/thing:3473552
This version is larger so it can be used by young and old.
Printed at 0.3mm for speed in PLA. Found that PETG fits a little looser in the connectors. Using PrusaSlicer, add a color change at ~2.3mm (just above the outer frame). I used green for the bottom layer and pink for the top later. Once printed, the tabs should break off with a little flexing. I also used a knife to cut the tabs off where needed.
https://www.thingiverse.com/thing:3473552
This version is larger so it can be used by young and old.
Printed at 0.3mm for speed in PLA. Found that PETG fits a little looser in the connectors. Using PrusaSlicer, add a color change at ~2.3mm (just above the outer frame). I used green for the bottom layer and pink for the top later. Once printed, the tabs should break off with a little flexing. I also used a knife to cut the tabs off where needed.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
