Thingiverse
Flange
von RLazure
52
Downloads
47
Likes
0
Makes
This **flange** is intended to slip over a pipe and be held on to plywood. The original use was to make an old English lamp post as a prop for a parade. 3" ABS pipe is used to support the lamp housing.
**Flange2.stl** has a 90 mm inner_dia which works well for a 3" diameter ABS pipe. The depth iis 80 mm with a 4 mm flange thickness. The screw hole radius is set at 2.5 mm which works well with #8 screws.
**Flange2.stl** has a 90 mm inner_dia which works well for a 3" diameter ABS pipe. The depth iis 80 mm with a 4 mm flange thickness. The screw hole radius is set at 2.5 mm which works well with #8 screws.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
