Flash HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.54x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #18 (1.52mm) swap to YellowBorder Only Colors from here until the end. At layer #23 (1.92mm) swap to Jade White