Flashforge AD5X Enclosure Mod - Large PTFE pass-through

Flashforge AD5X Enclosure Mod - Large Pass-through A large enclosed pass-through that seals the opening while allowing freer movement of the PTFE tubing. -Basic design. -Increases tubing clearance, reducing strain on the extruder. -Modified models C4 and D4 from the official (new version.4_20251110mf) AD5X enclosure. -The slotted acrylic panel is replaced by 2 printable panels. Printing tips (PETG): The 'Hood' model is difficult to print. Slow and 100% cooling needed. -Slow printing (60mm/s). -Cooling fan 100%. The other models can be printed on default settings. Assembling instructions: -After printing all 5 models replace models C4 and D4 from the original enclosure with the new ones. -Slide down the left and right panels replacing the original slotted acrylic panel. -Slide down the Hood with the PTFE tubing inside. -Put back the top of the AD5X enclosure. The original unmodified enclosure file is also included as backup. 06-22-2026 - Complete rebuild of the 'hood' model and the description page.