FlashForge Creator & Pro Connectors

I decided to do this write-up, since i have seen a lot of people asking what connectors are for certain electronics on the FFC and FFCP. I am in the process of converting my printers wiring from the cheap china to a good quality silicone wire. I have read too many printers that have caught fire due to wires breaking and causing high resistance connecions, or flat out shorting out. Here is the list of 100% verified connectors. I ordered them and have them in hand and have tested each one!

5x Stepper Motor PHR-6 6 POSITION PH SERIES 2MM SPACING DIGIKEY # 455-1162-ND
20x Crimp Connectors for above housing 22AWG - 24AWG DIGIKEY # WM2510CT-ND
5x Stepper Motor to MighjtyBoard (KIT) 4P KK-156 Series DIGIKEY # WMLX-203
1x Heated Build Plate POWER Housing 2 pin DIGIKEY # 1744036-2-SI-ND
2x Heated Build Plate Crimps for above housings 18AWG-22AWG DIGIKEY # 1123721 -2
1x Heated build plate sensor are XH 4p 2.5mm DIGIKEY # 455-02267-ND
4x Crimp/Contacts for above XH Connectors 22AWG -