FlashForge Creator Pro 2 cooling upgrade

After a few months of using my 3D printer decided to redesign the cooling fan nozzle to be sure that the main air stream goes to the edge of hotend not higher as designed by default.

Materials needed

2 M2x16 screws to hold the top and bottom together
2 M2x3x3.5 brass thread inserts

All remaining fastening screws can be taken from the standard assembly including the standard fan.

On the attached photo there is one of the prototypes without post-print. I used ASA from one of the local suppliers which keeps structure and form up to 100 degrees Celsium

Cheers