MakerWorld
Other House Models
Vai al Modello
Flask boot in different sizes
6
Download
2
Likes
4
Makes
Flask boot created for Hydro Flask Trail Series 32 oz / 946 ml (see picture)Lightweight (only 11.3 gr for 80mm version)Grip pattern Air holeBoot height 25mmDifferent sizes in the print profile; 70mm, 71.5mm, 73mm, 80mm, 90mm Scale according to your needs in Bambu Studio if you need other sizes. The diameter is measured inside (hole).Should work on flasks/bottles/tumblers from different brands. I have tested the following with success: 90mm- Hydro Flask 40 oz / 1180 ml80mm - Hydro Flask Trail Series 32 oz / 946 ml71.5mm- Hydro Flask 24 oz / 710 ml- Hydro Flask 21 oz / 621 ml- Hydro Flask 18 oz / 532 ml - Hydro Flask 12 oz / 354 ml (mug)For this print I have used TPU 95A. “Auto circle contour - hole compensation” is turned on in the print profile to keep the inside diameter on the printed object as close to the 3D model as possible. I recommend to “print by object” if you are printing more than one object per plate.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
