Flat cable 2.54 stripper & wire separator V2 Beta

I have built a small tool here to help advance other projects.I was tired of laboriously stripping ribbon cables wire by wire, and the cables always lookedvery messy afterwards. With this tool, it's now a breeze.I have been developing it for quite a while and can now share it with a clear conscience.I wouldn't want to be without it now!!!Please note, however, that parts, screws, or materials may change further. What you need:- First, the printed parts, 6 in total.- Then a few screws. I made sure to use ones that most people should have.- Two ballpoint pen springs, preferably two of the same.- And a few cutter blades. The springs should be 4x20mmYou will need, 8x 10mm M3 Allen screws, 3x 20mm M3 Allen screws, 1x 30mm M3 Allen screw.2x M3 nuts (or nylon lock nuts)For the blades, you need the 10mm blades for the small cutters, not the large ones!!! The following images always show what you need for each step. ASSEMBLY Preparing the body: 2x 10mm, 1x 20mm, 1x30mm, 1x Nut, 1x Blade