Thingiverse
Flat-pack Living Hinge Dice Tower
by ecodad
14
Downloads
17
Likes
0
Makes
Flat pack dice tower you can store with your RPG books and papers.
Assembled: 180mm x 100mm (dia)
Flat: 300mm x 180mm (11.8" x 7")
The dice tower rolls up around three shelves that are held in place with tabs and little clips. It can be assembled or disassembled in about a minute with practice.
The tower stands 180mm (7") tall and is 100mm (4") in diameter. Flattened the tower is 300mm x 100mm (11.8" x 7.0"). The living hinges and tabs are sized for 1/8" birch plywood (aka 3mm).
Note: The SVG file format is stuck in the images and can be downloaded there in addition to the PDF or AI in the Files section.
On a Epilog Fusion M2, the whole tower takes about 8 minutes to cut and if you are really careful, you can fit 2 full towers onto a 24"x12"x1/8" sheet of plywood. I have not tried it with similarly sized acrylic yet.
Assembled: 180mm x 100mm (dia)
Flat: 300mm x 180mm (11.8" x 7")
The dice tower rolls up around three shelves that are held in place with tabs and little clips. It can be assembled or disassembled in about a minute with practice.
The tower stands 180mm (7") tall and is 100mm (4") in diameter. Flattened the tower is 300mm x 100mm (11.8" x 7.0"). The living hinges and tabs are sized for 1/8" birch plywood (aka 3mm).
Note: The SVG file format is stuck in the images and can be downloaded there in addition to the PDF or AI in the Files section.
On a Epilog Fusion M2, the whole tower takes about 8 minutes to cut and if you are really careful, you can fit 2 full towers onto a 24"x12"x1/8" sheet of plywood. I have not tried it with similarly sized acrylic yet.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
