Flattened Frog Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 137.45x152.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #14 (1.2mm) swap to BambuLab Green At layer #17 (1.44mm) swap to Sunflower Yellow At layer #20 (1.68mm) swap to Jade White for the rest.