Slicer Discord
Flexgate jig for Macbook Pro – Modelo 3D imprimible de MakerWorld MakerWorld
Machine Tools

Flexgate jig for Macbook Pro

17 Descargas
7 Likes
1 Makes
Ver Modelo
SummaryThis is a Jig to help you fix the FlexGate issue on Macbook Pro version 2016 and 2017.The new cable will be 4mm longer and there is a line to help with the cut at the right lenght.It is highly inspired from https://www.clinicadelamanzana.com/flexgatefix, so if you use this model to make money, better buy one from this guy.I printed it in PLA with 0.1mm, 10% infill, organic suports.Part list I bought for the repair: Flex cable: https://fr.aliexpress.com/item/1005005371312769.htmlUV curable solder mask: https://fr.aliexpress.com/item/1005005972089606.htmlUV light: https://fr.aliexpress.com/item/1005001989410229.htmlSolder flux: https://fr.aliexpress.com/item/1005004301106086.htmlCopper lacquer wire 0.1mm: https://www.aliexpress.us/item/1005005443172919.htmlWarning: The jig can melt around the cable if you heat it to long with the solder iron. It happend to me and I used a hot air iron solder at 190°C to take it off.
Categoría
Machine Tools
Fuente
MakerWorld
Publicado
Actualizado
Lo que necesitas para imprimir: Principiante Baja confianza
Pieza única
Soportes 1/3
Ensamblaje 0/3
Ajustes 1/3
Tamaño de cama 0/3
Postproceso 0/3
Impresora
FDM / FFF
Formato de archivo
STL
Material
PLA
Software
Cura, PrusaSlicer o similar
Aún no hay valoraciones
Aún no hay comentarios – ¡sé el primero!

Modelos similares

6 Sugerencias
Feed Blog Slicer Calculadora Búsqueda por imagen Enviar Contacto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Añadir a colección