Slicer Discord
Flexi Squid – 3D-printbaar model van MakerWorld MakerWorld
Other Toys & Games

Flexi Squid

76 Downloads
40 Likes
0 Makes
Model downloaden
This is a cute, articulated, flexi squid. After making my cute worm, (which you should see if you haven't already), I tested my newly learned skills by making this. If you look closely, you'll find that this is the exact same chain (with some tolerances adjusted to make it flex better.I was inspired by the flexi octopus and decided to make this.Print SettingsPrinter brand:ELEGOOPrinter:ELEGOO NEPTUNE 4Rafts:NoSupports:NoResolution:0.16-0.2 mm (I used 0.16)Infill:I used 20% infill, lightning pattern, but I'm pretty sure it doesn't matterFilament brand:ElegooFilament color:Any (although if you use black, the eyes will be a bit harder to seeFilament material:PLANotes:Any printer should be able to print this (the tolerance is 0.2 mm). All it takes are the right slicer settings.DO NOT use horizontal layer expansion. These walls are adapted to exactly fit a 0.42 line width. If you use a negative horizontal layer expansion, you'll find that the walls will be brittle, thin,
Categorie
Other Toys & Games
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Waarom?
print-in-place ontwerp
Print-in-place
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie