Flexi Squidward (50g)

This is a flexi / articulated Squidward. It's about a 50 gram, 2h38m print. The STL is scaled down to 80% - I designed it slightly larger to get some smaller hinges in at where his arms meet his body - feel free to play around with the sizing. I created this flexi Squidward using the MakerLab tool: Powered by MakerWorld-Flexi Toy Maker (https://makerworld.com/makerlab/flexiToyMaker) If you look closely, the blue on the front surface of Squidward is not the same as the remaining blue of Squidward. This is because I did not have a very good shade of blue to match his original teal / blue-green hue. What I did was start the print with a white filament in the slot for where the blue should be, and then add a pause after the first layer, in which I swapped in my dark blue filament. This gave me a lighter shade of blue without having to buy a new spool. This is totally optional, but if you would like to play around with shading your filaments, read the following instructions for guidance